User's Manual

Important notes:
Use only the power adaptor attached with the product. Use unauthorized power adapter
may cause damage to your IP Camera.
IP Camera terminal shall be installed in an indoor environment where the rain or snow
could not pour it.
Do not touch the lens of the IP Camera at will. The optimum focus range has been set
before it is delivered out of the factory. If you turn the lens, it may cause incorrect focus
and vague images.
Do connect your mobile device to local Wi-Fi network firstly before initially installation of a
new camera.
RESET BUTTON functions when it was pressed and hold for at least 8 seconds.
Indicator LED status:
z Solid red light: when the device is power on, the LED is solid red light
z Flash fast: Device is automatic searching for the Wi-fi network which was connected
last time. At this time, you can’t operate the device.
z Flash slowly: If can not find the last connected Wi-fi network, it will wait for a Wi-Fi
connection. At this time, you can find the camera SSID in the Wi-Fi list and start to
connect the camera.
z Light off: Working condition. At this time, the camera has been connected to a local
Wi-Fi network. You can view and control the camera.