User's Manual

4.7 “IOS” Advanced setting
7. Input device password, the
default is “admin”. This password
needs to be changed later for safety
reason.
8. Done and ready for Real
time streaming
Device Security Code (Device Password) must be reset after initial
installation to enhance safety.
Users can alter Wi-Fi connections remotely by selecting the
detachable wifi signal around the camera and input wifi password.
With Micro SD card, users can record the video stream locally.
By selecting “ALARM” recording mode, less storage will be occupied.
And this “Alarm” mode only valid when “motion detection” is NOT
“off”.