User's Manual

4.5 “Android” Advanced setting
7. Press “+” to proceed
8. Input device password, the
default is “admin”. This password
needs to be changed later for
safety reason.
9. Done and ready for Real
time streaming
Device Security Code (Device Password) must be reset after initial
installation to enhance safety.
Users can alter Wi-Fi connections remotely by selecting the
detachable wifi signal around the camera and input wifi password.
Users can active /close motion detection function. And can also select
type of notifications such as by ringtone and/or vibration.
This function works only when using micro SD card. By selecting
“ALARM” mode, less storage will be occupied. Please be noted that
this “Alarm” mode only valid when “motion detection” is NOT “off”.