User's Manual

4. Camera installation
4.1 For software, please scan below QR Code to install app “MyCam Pro” into mobile
device.
IOS Android
4.2. Plug the power adaptor into camera.
4.3. It takes approx 60 seconds to boot up the camera, and the indicator blue led will keep
flashing.
4.1 For hardware installation, please follow below steps.
Step1. Place the suction cup on a smooth surface (such as
glass, marble or metal etc.), and press the cup tight onto the
surface.
Step2. Hold and rotate the cup body 90° until it was
fastened.
Step3. Attach the camera to the metal ball on top of the
suction cup.
** Please be noted that the camera can be separately
adhered to a surface made of iron, as there is a magnet
inside *