Quick Start Guide

Video Capture Cards

8. To access the frame rate settings, on the Main System, click the Configure button,

select System Configure, and select Camera Configure. This dialog box appears.

Figure 1-22

9. In the Rec Control section, click the Arrow button. The Hardware Rec. Frame Rate

Setting dialog box appears.

10. Set the maximum frame rate for motion, non-motion and I/O trigger periods so as to

save as much disk space as possible.

11. To adjust image quality, in the Video Attributes section, move the sliders to the desired

values or click Default to apply default values.

Note: The default settings are as follows: Recording Quality is 3, Video Resolution is 704 x

480 (NTSC) or 704 x 576 (PAL), Codec is Geo H.264 and Frame Rate is 30 (NTSC) or 25

(PAL).