Quick Start Guide

Video Capture Cards
15
1
3. In the Select Hardware-compressed Camera section, select one camera to be
configured.
4. Select the recording quality.
5. The Enable hardware-compressed data FIFO option is disabled by default. When the
option is enabled, the hardware-compressed data from the video IP device, such as IP
camera, video server and compact DVR, will be transmitted directly to remote servers
instead of being compressed again on the DVR. The remote servers include CMS-
related servers and WebCam Server. This feature can decrease the system load of
DVR but increase that of remote servers.
6. To use standard H.264 codec in recording, enable Standard codec in the Recording
codec format section.
7. If you want to apply the same setting to all cameras, click the Finger button in each
section.
8. To access the frame rate settings, on the Main System, click the Configure button,
select System Configure, and select Camera Configure. This dialog box appears.
Figure 1-15
9. In the Rec Control section, click the Arrow button. The Hardware Rec. Frame Rate
Setting dialog box appears.
10. Set the maximum frame rate for motion, non-motion, and I/O trigger periods so as to
save as much disk space as possible.