User Manual

9.3.3 Inserting the Sun-Shield Cover

After setting up the Bullet Camera, now you can install the sun-shield cover

to the camera.

1. Fasten the hexagon screws either on top or below the camera.

Hexagon Screws

2. Put the sun-shield cover on top of hexagon screws. Make sure to aim

the rear hexagon screw at the edge of the sun-shield cover’s aperture

for optimal sun-shield performance.

Sun-Shield Cover

3. Fasten the Philips head screws with the plastic screw spacers.

Philips Head Screw

Plastic Screw Spacer