Manualshelf

Installation Guide

ManualsBrandsGeoVision ManualsPoE AdapterGeoVision GV-PA903BT Gigabit BT PoE Adapter
123
Table Of Contents
February 24, 2022
3
Mount Installation
Desktop
To install GV-PA903BT on a leveled surface, attach the four supplied rubber feet at the
bottom of the adapter as illustrated and place it on a leveled surface.
Wall
For wall mount, insert on the desired wall two self-prepared screws that align to the base of
the GV-PA903BT. Tighten the screws to the point where there are about 1.5 mm left hanging
out and hang the GV-PA903BT onto the screws.
Specifications
For detailed specifications, see
Datasheet