Datasheet

ManualsBrandsGeovision Manualsaudio & home theatreGV-LOOP

TheGV‐LoopThroughCardisdesignedtotakethevideosignaldirectlyfromtheGVCaptureCard,withoutinternaldeviceprocesses,andthensplitit

into16signalswhilemaintainingvideoquality.

Specifications

Interface 2x40‐pinconnector

2x15‐pinD‐typeports

OutputInterface

1x40‐pinconnector

InputSignal 16channels

Dimensions(WxH) 130x98(mm)/5.12x3.86(in)

InstallationGuide GV‐LoopThroughCard

Note:Allspecificationsaresubjecttochangewithoutnotice.

February 6, 2014

‐1‐

Summary of content (1 pages)

PAGE 1
The GV‐Loop Through Card is designed to take the video signal directly from the GV Capture Card, without internal device processes, and then split it into 16 signals while maintaining video quality. Specifications Interface Output Interface 2 x 40‐pin connector 2 x 15‐pin D‐type ports 1 x 40‐pin connector Input Signal 16 channels Dimensions (W x H) 130 x 98 (mm) / 5.12 x 3.86 (in) Installation Guide GV‐Loop Through Card Note: All specifications are subject to change without notice.