User Manual
Table Of Contents
- Important Notes
- Contents
- Chapter 2
- Chapter 3
- Video Analysis
- 3.1 Object Counting and Intrusion Alarm
- 3.2 Object Index
- 3.3 Automatic Video Snapshots
- 3.4 Face Detection
- 3.5 Face Count
- 3.6 Privacy Mask Protection
- 3.7 Panorama View
- 3.8 Video Defogging
- 3.9 Video Stabilization
- 3.10 Wide Angle Lens Dewarping
- 3.11 Advanced Motion Detection
- 3.12 Crowd Detection
- 3.13 Advanced Scene Change Detection
- 3.14 Advanced Unattended Object Detection
- 3.15 Advanced Missing Object Detection
- 3.16 Text Overlay
- 3.17 Fisheye View
- 3.18 Specifications
- Video Analysis
- Chapter 4
- Chapter 5
- Chapter 6
- Chapter 7
- Chapter 8
- Chapter 9
- Useful Utilities
- 9.1 Dynamic DNS
- 9.2 Watermark Viewer
- 9.3 Windows Lockup
- 9.4 Authentication Server
- 9.5 Fast Backup and Restore
- 9.6 Bandwidth Control Application
- 9.7 Language Setting
- 9.8 Skype Video Utility
- 9.9 GV-SDSyncCard Utility
- Useful Utilities
IP Camera Setup
2
For details on Automatic Setup, refer to Adding Cameras in Chapter 1. For other methods, refer to the
sections below.
Third-Party IP Devices
GV-VMS supports not only GeoVision’s own IP devices but also products from other leading
manufacturers. For the supported IP devices, refer to the Supported IP Camera List at
http://www.geovision.com.tw/english/4_21.asp
.
If the third-party camera is not detected using the scan in Scan Camera or Automatic Setup, you will
need to add the camera using Manual Setup. You may need to add the camera using RTSP, ONVIF or
PSIA protocols. Refer to Connection through RTSP, ONVIF & PSIA later in this chapter for details.
77