User Manual
Table Of Contents
- Important Notes
- Contents
- Chapter 2
- Chapter 3
- Video Analysis
- 3.1 Object Counting and Intrusion Alarm
- 3.2 Object Index
- 3.3 Automatic Video Snapshots
- 3.4 Face Detection
- 3.5 Face Count
- 3.6 Privacy Mask Protection
- 3.7 Panorama View
- 3.8 Video Defogging
- 3.9 Video Stabilization
- 3.10 Wide Angle Lens Dewarping
- 3.11 Advanced Motion Detection
- 3.12 Crowd Detection
- 3.13 Advanced Scene Change Detection
- 3.14 Advanced Unattended Object Detection
- 3.15 Advanced Missing Object Detection
- 3.16 Text Overlay
- 3.17 Fisheye View
- 3.18 Specifications
- Video Analysis
- Chapter 4
- Chapter 5
- Chapter 6
- Chapter 7
- Chapter 8
- Chapter 9
- Useful Utilities
- 9.1 Dynamic DNS
- 9.2 Watermark Viewer
- 9.3 Windows Lockup
- 9.4 Authentication Server
- 9.5 Fast Backup and Restore
- 9.6 Bandwidth Control Application
- 9.7 Language Setting
- 9.8 Skype Video Utility
- 9.9 GV-SDSyncCard Utility
- Useful Utilities
Useful Utilities
9
9.6.5 Controlling Specific WebCam Server
To disconnect a login user or set the bandwidth limit for a specific user, right-click the user to
have the options below:
Figure 9-41
Kick: Disconnect the user from the WebCam server.
Block IP: Prohibit the user from connecting to the WebCam server. To use the function,
the Enable IP Black List option (Figure 9-44) must be selected first.
Bandwidth Setup: Select By Username to specify a bandwidth limit for the user, or
select By IP to limit the bandwidth used by the IP address. This setup dialog box will
appear. In this example, an IP address is selected for bandwidth limit setup. Select
Bandwidth Setup, specify a bandwidth limit and click OK.
Figure 9-42
343