Quick Installation Guide

12
2.3 Start Monitoring
After setting up cameras and the live view, be sure to start monitoring the cameras to
activate the following functions.
• Recording (See Section 3.1)
• Video Analysis (See Chapter 5)
• I/O Applications (See Section 7.1)
To start monitoring on connected cameras, click Toolbar
, select Monitor , and select
Start All Monitoring or select individual cameras.
Figure 2-5
To see how to access recorded videos, refer to Chapter 6 Video Playback and Backup in this
Quick Start Guide.
Note: If you have set a schedule, you can select Start Schedule Monitoring. The
schedule takes precedence and the functions above will enable and disable accordingly.
See 6.2 Setting Schedules in this Quick Start Guide on how to set a schedule.