User Manual

326
 Automatic Failover Support: Select and click the Setting button to configure up to 2
Authentication Servers in case the primary Authentication Server fails. Once the primary
server fails, the second or the third server will take over the connection from clients and
provide uninterrupted services. Note the settings of Authorized ID and Authorized
Password on the failover server must match those of the primary server.
Tip: To set up the failover Authentication Server, you can export the current settings by
using the Export Account and Import Account functions in the Exit button.
Note: Once the primary Authentication Server is ready to resume the services, it is
required to close the failover Authentication Server so the connection from clients can
move back to the primary.
[Security Setting]
 Enhance network security: Strengthen network security on Authentication Server.
 Enable IP White List: Click Edit to create a list of IP addresses only which are allowed to
establish connection with Authentication Server.
[Server Setting]
 Auto run server service upon startup: Allow the server to automatically start service
upon Windows startup.
 Notify when DVR is disconnected from server: Notify the Authentication Server with a
pop-up window when the GV-VMS is disconnected with the Authentication Server.