Installation Guide

64
5. Thread the camera cable through the pendant tube (GV-Mount203, No. 2) and secure the
tube to the end of the housing cap (GV-Mount901, No. 2) with M6 screws (GV-Mount901,
No. 4).
6. Hinge and hook the pendant tube to the junction box.
7. Connect the network, power and other cables to the camera. See 10.5 Connecting the
Camera, GV-IPCam H.264 User’s Manual on the software CD.
8. Conceal the junction box with M5 screws (GV-Mount203, No. 3) using the torx wrench
(GV-Mount203, No. 5).
9. Refer to the indicated sections of the GV-IPCam H.264 User’s Manual on the software
CD to:
A. Access the live view. See 14.1 Accessing the Live View.
B. Adjust the angle, focus and zoom of the camera. See steps 9 and 10 in 10.4.1 Hard-
Ceiling Mount.
C. Secure the thread lock, replace the silica gel bag and secure the housing cover. See
steps 11 to 13 in 10.4.1 Hard-Ceiling Mount.