Installation Guide

58
5. Thread the camera cable through the pendant tube (GV-Mount200, No. 1) and secure the
tube to the end of the housing cap (GV-Mount901, No. 2) with M6 screws (GV-Mount901,
No. 4).
6. Thread the camera cable through the mounting bracket and secure the pendant tube to
the mounting bracket. Slide the 30 mm M8 screws (GV-Mount400 / GV-Mount410, No. 3)
from the front and secure from the backside using plain washer (GV-Mount400 / GV-
Mount410, No. 5), split washer (GV-Mount400 / GV-Mount410, No. 6) and screw cap
(GV-Mount400 / GV-Mount410, No. 7).
Backside View
7. Refer to the indicated sections of the GV-IPCam H.264 User’s Manual on the software
CD to:
A. Connect the network, power and other cables to the camera. See 10.5 Connecting
the Camera.
B. Access the live view. See 14.1 Accessing the Live View.
C. Adjust the angle, focus and zoom of the camera. See steps 9 and 10 in 10.4.1
Hard-Ceiling Mount.
D. Secure the thread lock, replace the silica gel bag and secure the housing cover.
See steps 11 to 13 in 10.4.1 Hard-Ceiling Mount.