Installation Guide
Table Of Contents
- GV-Mount Accessories Installation Guide(MT-E-EN)
- GV-Mount Accessories Installation Guide
- Copyright
- Contents
- Installation Overview
- Required Accessories
- Note for Installing Camera Outdoor
- Note for Adjusting Focus and Zoom
- Note for Closing the Bullet Camera Cover
- Note for Supported Power BoxTypes
- 1. Introduction
- 2. Installing the Vandal Proof IP Dome
- 2.1 Assembling the Vandal Proof IP Dome with the dome housing
- 2.3 Straight Tube Mount
- 2.4 L-Shaped Wall Mount
- 2.5 Wall Box Mount
- 2.6 Wall Pendant Mount
- 2.7 Convex Corner Mount with Pendant Tube
- 2.8 Convex Corner Mount with Wall Bracket
- 2.9 Convex Corner Box Mount
- 2.10 Concave Corner Mount with Pendant Tube
- 2.11 Concave Corner Mount with Wall Bracket
- 2.12 Pole Mount with Pendant Tube
- 2.13 Pole Mount with Wall Bracket
- 2.14 Pole Box Mount
- 3. Installing the Fixed IP Dome
- 4. Installing the Fisheye Camera
- 5. Installing the GV-SD220/220-S IP Speed Dome
- 6. Installing the Bullet Camera
- 7. Installing the Arctic Box Camera
- 8. Installing the Mini Fixed Dome
- 9. Installing the Mini Fixed Rugged Dome
- GV-Mount Accessories Installation Guide
Introduction
7
1
Model No.
Name
Details
GV-Mount907
In-Ceiling Mounting Kit for
GV-SD220 IP Speed Dome
Dimensions
Ø 230 x 153.49 mm /
Ø 9.08 x 6.05 in
Weight
0.87 kg / 1.91 lb
Supplied with
In-ceiling cover x 1
Mounting ring x 1
Mounting plate x 1
Support rack x 3
Screw x 9
Thread lock & screw x 1 set
Lock plate & screw x 1 set
Hex key x 1
GV-Mount908
In-Ceiling Mounting Kit for
GV-SD220-S IP Speed Dome
Dimensions
Mounting plate: 227 x 286 mm /
8.9’’ x 11.3’’
Weight
2.05 Kg / 4.5 lb
Supplied with
Screw x 4
Hex key x 1
M6 screw x 4
Installation sticker x 1
M4 screw x 2
In-ceiling cover x 1