Installation Guide
Table Of Contents
- GV-Mount Accessories Installation Guide(MT-E-EN)
- GV-Mount Accessories Installation Guide
- Copyright
- Contents
- Installation Overview
- Required Accessories
- Note for Installing Camera Outdoor
- Note for Adjusting Focus and Zoom
- Note for Closing the Bullet Camera Cover
- Note for Supported Power BoxTypes
- 1. Introduction
- 2. Installing the Vandal Proof IP Dome
- 2.1 Assembling the Vandal Proof IP Dome with the dome housing
- 2.3 Straight Tube Mount
- 2.4 L-Shaped Wall Mount
- 2.5 Wall Box Mount
- 2.6 Wall Pendant Mount
- 2.7 Convex Corner Mount with Pendant Tube
- 2.8 Convex Corner Mount with Wall Bracket
- 2.9 Convex Corner Box Mount
- 2.10 Concave Corner Mount with Pendant Tube
- 2.11 Concave Corner Mount with Wall Bracket
- 2.12 Pole Mount with Pendant Tube
- 2.13 Pole Mount with Wall Bracket
- 2.14 Pole Box Mount
- 3. Installing the Fixed IP Dome
- 4. Installing the Fisheye Camera
- 5. Installing the GV-SD220/220-S IP Speed Dome
- 6. Installing the Bullet Camera
- 7. Installing the Arctic Box Camera
- 8. Installing the Mini Fixed Dome
- 9. Installing the Mini Fixed Rugged Dome
- GV-Mount Accessories Installation Guide
Installing the GV-SD220/220-S
143
5
5.9 Pole Mount
This installation method is only applicable to outdoor GV-IP Speed Dome (GV-SD220-S).
Required accessories:
Pendant Tube (in GV-SD220-S standard package)
GV-Mount400 or GV-Mount410
1. Assemble the camera with the pendant tube. See 5.1 Assembling GV-SD220-S with
Pendant Tube.
2. Follow step 2 in 4.9 Pole Mount to secure the pole mount bracket.
3. Follow step 4 in 4.9 Pole Mount to secure the camera to the pole.
4. Connect the network, power and other cables to the camera. See 1.6 Connecting the
Camera, GV-IP Speed Dome GV-SD220 User’s Manual on the software CD.