Installation Guide
Table Of Contents
- GV-Mount Accessories Installation Guide(MT-E-EN)
- GV-Mount Accessories Installation Guide
- Copyright
- Contents
- Installation Overview
- Required Accessories
- Note for Installing Camera Outdoor
- Note for Adjusting Focus and Zoom
- Note for Closing the Bullet Camera Cover
- Note for Supported Power BoxTypes
- 1. Introduction
- 2. Installing the Vandal Proof IP Dome
- 2.1 Assembling the Vandal Proof IP Dome with the dome housing
- 2.3 Straight Tube Mount
- 2.4 L-Shaped Wall Mount
- 2.5 Wall Box Mount
- 2.6 Wall Pendant Mount
- 2.7 Convex Corner Mount with Pendant Tube
- 2.8 Convex Corner Mount with Wall Bracket
- 2.9 Convex Corner Box Mount
- 2.10 Concave Corner Mount with Pendant Tube
- 2.11 Concave Corner Mount with Wall Bracket
- 2.12 Pole Mount with Pendant Tube
- 2.13 Pole Mount with Wall Bracket
- 2.14 Pole Box Mount
- 3. Installing the Fixed IP Dome
- 4. Installing the Fisheye Camera
- 5. Installing the GV-SD220/220-S IP Speed Dome
- 6. Installing the Bullet Camera
- 7. Installing the Arctic Box Camera
- 8. Installing the Mini Fixed Dome
- 9. Installing the Mini Fixed Rugged Dome
- GV-Mount Accessories Installation Guide
138
5.6 Convex Corner Mount
This installation method is only applicable to outdoor GV-IP Speed Dome (GV-SD220-S).
Required accessories:
Pendant Tube (in GV-SD220-S standard package)
GV-Mount300
The user needs to prepare:
Screws for wall x 8
1. Assemble the camera with the pendant tube. See 5.1 Assembling GV-SD220-S with
Pendant Tube.
2. Follow steps 3 to 5 in 4.6 Convex Corner Mount to assemble the mounting plates to the
camera and secure the camera to the wall.
3. Connect the network, power and other cables to the camera. See 1.6 Connecting the
Camera, GV-IP Speed Dome GV-SD220 User’s Manual on the software CD.