Installation Guide

94
D. Thread the necessary wires and cables through the corrugated tube, plug the tube
to the box and secure with part D.
5. Hinge and hook the pendant tube (GV-Mount203, No. 2) to the junction box.
P
o
w
e
r
E
t
h
e
r
n
e
t
6. Thread the wires and cables through the pendant tube into the dome housing and
connect the network, power and other cables to the camera. See 11.5 Connecting the
Camera, GV-IPCam H.264 User’s Manual on the software CD.
7. Secure the pendant tube to the end of the housing cap (GV-Mount902, No. 2) with M6
screws (GV-Mount902, No. 4).
8. Conceal the junction box with M5 screws (GV-Mount203, No. 3) using the torx wrench
(GV-Mount203, No. 5).
9. Refer to the indicated sections of the GV-IPCam H.264 User’s Manual on the software
CD to:
A. Access the live view. See 14.1 Accessing the Live View.
B. Adjust the angle, focus and zoom. See steps 6 and 7 in 11.4.1 Hard-Ceiling Mount.
10. Put on the housing cover. See 3.1.2 Putting on the Housing Cover.