Installation Guide

Installing the Fixed IP Dome
91
3
3. Thread the necessary wires and cables through the pendant tube and secure the
mounting bracket to the pole using 3 steel straps (GV-Mount400 / GV-Mount410, No. 2).
Rotate the screw on the strap to adjust its size.
Ethernet
Or
Power
4. Thread the wires and cables into the dome housing and connect the network, power and
other cables to the camera. See 11.5 Connecting the Camera, GV-IPCam H.264 User’s
Manual on the software CD.
5. Secure the pendant tube to the end of the housing cap (GV-Mount902, No. 2) with M6
screws (GV-Mount902, No. 4).
6. Refer to the indicated sections of the GV-IPCam H.264 User’s Manual on the software
CD to:
A. Access the live view. See 14.1 Accessing the Live View.
B. Adjust the angle, focus and zoom. See steps 6 and 7 in 11.4.1 Hard-Ceiling Mount.
7. Put on the housing cover. See 3.1.2 Putting on the Housing Cover.