Installation Guide

86
D. Thread the necessary wires and cables through the corrugated tube, plug the tube
to the box and secure with part D.
Ethernet
Power
6. Hinge and hook the pendant tube (GV-Mount203, No. 2) to the junction box.
P
o
w
e
r
E
t
h
e
r
n
e
t
7. Thread the wires and cables through the pendant tube into the dome housing and
connect them to the camera. See 11.5 Connecting the Camera, GV-IPCam H.264 User’s
Manual on the software CD.
8. Secure the pendant tube to the end of the housing cap (GV-Mount902, No. 2) with M6
screws (GV-Mount902, No. 4).
9. Conceal the junction box with M5 screws using the torx wrench (GV-Mount203, No. 5).