User's Manual

Eyr GNSS RTK System User Manual
www.satlab.com.se 36
For detailed setting steps, please refer to ‘Satsurv Software User's Manual’ - Image
Measurement.
2.8 AR Stake
2.8.1 AR Stake Instructions
The Eyr receivers have newly added dual cameras, which can support the AR stakeout
function. The iHand55 control and the software Satsurv V2.3.0 and later versions are required.
The AR stakeout scene is defined as when the stakeout point is about 3m away from the
receiver, the camera of receiver is called, and the precise position of the stakeout point is
displayed in real time through the control, which can be reached with one shot.
After entering the point stakeout interface:
(1) Enter the stakeout point;
(2) Click the AR stakeout button ;
(3) According to the prompts to stake out;
(4) The stakeout is successful.
Click the AR stakeout button, when the distance from the stakeout point is > 3m, use the
control AR stakeout (control navigation); if the distance from the stakeout point is less than or
equal to 3m, switch to the receiver AR stakeout (receiver navigation).
Figure 2-8-1 Control Navigation Figure 2-8-2 Receiver Navigation