User's Manual

Eyr GNSS RTK System User Manual
www.satlab.com.se 34
2.7 Image measurement
The Eyr receivers have newly added dual cameras, which can support the image measurement
function. The SHC55 and the software Satsurv V2.3.0 and later versions are required.
The image measurement scene is defined as shooting the unreachable position. After the
solution is successfully solved by the control’s software, the points can be marked on the
photo and their coordinates can be calculated.
2.7.1 Video Shooting
1. Equipment Preparation
To perform image measurement, it is necessary to:
(1) Connect to a receiver that supports image measurement via wifi;
(2) The receiver has entered the tilt measurement mode;
(3) The solution state is fixed solution.
2. Shooting Process
After reaching the shooting conditions, enter the image measurement interface:
(1) Fixed-point shooting;
(2) Click to end;
(3) Upload optimization;
(4) Save;
(5) Point calculation.
Figure 2-7-1 Fix-Point Shooting Figure 2-7-2 Point Calculation