User's Manual

Eyr GNSS RTK System User Manual
www.satlab.com.se 17
2.3 WEB management system
Eyr has a built-in web management system that can be used to set the receiver's working mode,
data output, as well as view receiver information and satellite information. The receiver’s Wi-Fi
name is its S/N. You can connect it to a controller or phone (the default password is: 12345678)
and then input the IP address 192.168.20.1 into the browser to log onto the web management
system.
Note: The web management system can only be visited when the receiver’s Bluetooth isn’t
connected.
2.3.1 Main menu
After logging into the web management system, you can click Start to enter the main menu
interface. Each option of the main menu contains drop-down menus.
Power LED(green)
Flash
The power ≤10%.
Long-term
lighting
1. RTK mode: No correction data.
2. Static mode: Sampling has not started.
Data LED
Flash
1. RTK mode:
Flashes at the frequency of the correction transmit and
receives.
2. Static mode:
Sampling interval >1s: Flashes at the sampling interval.
Sampling interval ≤1s: Flashes once per second.
Off
1. RTK mode: No correction data.
2. Static mode: Sampling has not started.
Satellite LED
Long-term
lighting
Satellite is tracked.
Flash
Satellite is not tracked.