User's Manual

CONNECT TO THE

GEOSMARTPRO

APP

Connection:

1. Preparation: Plug your AirLit to charge and turn it

on by pressing the “On/Off ”button. Now press and

hold the “ ” button for 5 seconds until the “ ”

rapidly blinks. Click “ ” located on the top right-

hand corner of GeoSmartPro’s app homepage.

2. The option to add AirLit will automatically appear. If not,

click on the AirLit icon to connect. When prompted, enter

your Wi-Fi details and click next. Confirm the “ ” is

rapidly blinking.

3. Once you’ve entered all the details, the app will

now scan to add your AirLit and connect it through

your Wi-Fi network for remote access.

4. Wait until your configuration is successful, then

tap ”Complete” & Enjoy your AirLit!

Remember to turn on and

give permission of your location,

Bluetooth and Wi-Fi settings to the

GeoSmartPro app.