Caution : You must read this before you proceed CHAIR Label A Picture Description QTY Backrest 1 Page 1 OF 6
B Chair Seat 1 C Front Leg (with Preattached Leveller) 2 D Back Leg (with Preattached Leveller) 2 Description QTY ① Bolt (M6*19mm) 21 ② Spring Washer 21 ③ Washer 21 ④ Allen Key 1 Label Picture Before Beginning Assembly: Page 2 OF 6
Overview Chair Seat(B) Backrest(A) Front Leg(C) Back Leg(D) This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Chair, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 A B C D Place the Backresk(A), Chair Seat(B), Front Legs(C), Back Legs(D) on a clean, non-marring surface. Step 2 2.1 2.2 2.1) Align the Backrest(A) to the bottom of the Chair Seat(B) as pictured above. 2.2) Attach Backrest(A) to Chair Seat(B) using Bolts(①), Spring Washers(②), and Washer(③) with Allen Key(④) as shown in above picture. Tighten the Bolts fully in a sequential manner.
Step 3 B B Attach Front Leg(C) to Chair Seat(B) using Bolts(①), Spring Washers(②), and Washers(③) with Allen Key(④) as shown in above picture. Repeat this process with the remaining three Legs. Tighten the Bolts fully in a sequential manner. Step 4 With assistance from your adult partners, stand the Chair up. Adjust the Pre-installed Levellers at the bottom of Front Legs(C) and Back Legs(D) until the Chair is level with the ground. Step 5 Your Chair ready for use.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
