Assembly Instructions

Step 4
Step 5
Install the Legs(D) into the bottom of the Sofa Seat(A) by placing a Plastic
Washer(⑦) onto the threaded stem of the Legs.
And then insert the threaded stem into the threaded mounting position at each
Corner of the Bottom of the Sofa Seat(A).
Tighten by turning the Legs clockwise.
Note: The use of Plastic WAsher(⑦) are OPTIONAL and are especially useful
to help alleviate slight wobbles.
Some Legs may need more than one Washer Ring whilst some Legs may not
need any.
Position arm sofa right side up and test for stability on a Level Surface.
Add or remove Plastic WAsher(⑦) where needed to achieve stability.
Cover the bottom of the Sofa Seat(A) with the non-woven fabric.
Smooth down the Magic Tape on all four sides of the Seat by hand.
As shown in the picture.
Leg(D)
A
⑦
A
Sofa Seat
(
A
)
Leg(D)
5 of 8