Assembly Instructions Caution: You must read this before you proceed.
Assembly Preparation Before Beginning Assembly: Assembly Steps Overview Chair Base (A) Leg (B) FRONT FACING This Chair has multiple parts and may require up to 15 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Place the Chair Base(A) facedown onto a clean, non-marring surface. Attach Leg(B) to Chair Base(A) by inserting threaded end into mounting position at the base of the Chair. Tighten the Leg by turning clockwise by hand. Repeat the same process with the remaining three Legs. Step 2 Your Chair is now ready for use. This Chair can only be used on a flat, level surface.
Page 4 OF 4
