Assembly Instructions

Place Desk Top(A) facedown as pictured above.
Install Leg(B) into Desk Top(A) by putting a Gasket(①) onto the threaded stem.
Then insert the threaded stem of the Leg(B) into the threaded housing at the bottom of
the Desk Top(A) as pictured above.
Tighten by turning Leg clockwise.
Repeat the same process to install the remaining three Legs.
Note:The use of the Gaskets are OPTIONAL and are especially useful to help
alleviate slight wobbles. Some legs may need more than one gasket whilst some
legs may not need any. Using more than two gaskets on any single leg is not
recommended.
Step 3
Your Desk is now ready for use.
This Desk can be only used on a flat, level surface.
Page 4 of 5