Installation & Assembly

1. Carefully unpack and place all parts on a clear workspace and
line them up as per the sketch.
2. Insert harp (C) onto saddle of body section (A).
3. Screw bulb (B) onto socket of body section (A).
4. Install shade (D) onto harp (C) , installing the finial (E)
Adjust the finial front side corresponding to body front side, and
adjust the shade to be balance.
5. Insert the polarized plug to wall outlet, turn on switch and enjoy
your new lamp.
TO CLEAN,USE SOFT CLOTH ONLY, DO NOT USE ANY
CHEMICAL OR ABRASIVE CLEANERS.
A
B
C
E
D