Assembly Instructions

Step 2
Stand the Chair up and place on flat, level surface.
Carefully and gently sit onto the Chair.
This will help properly align all parts at all joints and remove any gaps.
Carefully get off the Chair and gently turn it over.
Tighen all Bolts at all joints.
When tightening the Bolts, tighten sequentially.
Do not tighten any Bolt fully and then move on towards the next one, this
could cause the frame to warp.
If the Chair is not Stable it could lead to damage to the product.
Your Dining Chair is ready for use.
This Dining Chair can only be used on a flat, level surface.
Step 1
Place the Chair Body(A) facedown on the edge of a clean, non-marrring
Table Top.
Align the mounting positions on the Leg Frame(B) with Chair Body(A).
Attach Leg Frame(B) to Chair Body(A) using Bolts(①), Washers(②) and
Spring Washers(③) with Allen Key(④) as pictured above.
Do not fully tighten the Bolts.
Page 3 OF 4