Caution : You must read this before you proceed Dining Chair Label Picture Description QTY A Chair Body 1 B Leg Frame 1 Page 1 OF 4
Label Picture Description QTY ① Bolt (M6 x 20mm) 5 ② Washer 5 ③ Spring Washer 5 ④ Allen Key 1 Before Beginning Assembly: Overview This Dining Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Dining Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Place the Chair Body(A) facedown on the edge of a clean, non-marrring Table Top. Align the mounting positions on the Leg Frame(B) with Chair Body(A). Attach Leg Frame(B) to Chair Body(A) using Bolts(①), Washers(②) and Spring Washers(③) with Allen Key(④) as pictured above. Do not fully tighten the Bolts. Step 2 Stand the Chair up and place on flat, level surface. Carefully and gently sit onto the Chair. This will help properly align all parts at all joints and remove any gaps.
Page 4 OF 4
