Work Light User Manual

5
GEORG FISCHER +GF+
3 Features and scope of
application of the pipe
cutter
The pipe cutter
º is a fully configured working machine suitable
for workshop and building site operation;
º is part of the combined KM 2 and GTM 2
pipe cutting and threading machines;
º works using the safety-enhancing principle:
stationary pipe, rotating tool.
The pipe cutter is suitable for
º cutting and
º bevelling
pipes.
The cut pipes are free from burr, so no
deburring (in- or outside) is required.
This reduces the risk of corrosion.
Scope of application RA 21 RA 21
Special
º pipe Ø 1/4" to 2"
or 10 mm to 63 mm X X
º up to 5.5 mm wall
thickness
Chrome and stainless
steel pipes up to 1.5 mm X
wall thickness
Solid material
Ø 6 mm to 16 mm X