Work Light User Manual

3
GEORG FISCHER +GF+
Working with safety in mind
"Make your contribution to safety at the workplace."
Report any unusual behaviour on the part of the
machine to the person in charge immediately.
Always work with safety in mind.
º Wear safety goggles during
cutting and bevelling operations.
º Switch the RA 21 (S) off after
completing each stage of work and
allow the machine to run a stop.
º Disconnect from the mains before
cleaning the pipe cutter.
The cutter and saw blade may cause
injury.
Therefore:
º Keep your hands away from the
tools during cutting and bevelling
operations.
Keep the pipe cutter dry, do not use
in the rain.
Do not use the pipe cutter in areas
subject to explosion hazards.
Disposal
Please make sure that material chips and used
gear oil are disposed of properly.
Further safety rules
Comply with the regulations, standards and
guidelines that apply in your country.