Work Light User Manual

16
GEORG FISCHER +GF+¹
!Mark the cutting
location on the
pipe.
!Insert the pipe in the
vise.
!Push the marked
cutting location over
the saw blade.
!Clamp the pipe in
the vise.
Use a pipe support for pipes that are over
1 m long.
6.5 Cutting the pipe
Cut thin-walled chrome and stainless steel
pipe up to 1.5 mm wall thickness only with
RA 21 Special.
Put on safety goggles before cutting.
!Connect the pipe
cutter to the mains.
!Apply saw blade
lubricant to the saw
blade teeth.
Repeat the lubrication every three cuts.
If in contact with drinking water or
foodstuffs, use only Georg Fischer
lubricating gel.
³ 1 m
³ 1 m