Work Light User Manual

9
GEORG FISCHER +GF+
5.2 Transporting and assembling the pipe cutter
Transport
Disconnect from the power supply
before transporting, mounting or
dismounting and allow the machine to
run a stop.
Mounting the quick mounting base plate
The pipe cutter with the vise is mounted either
º on the quick mounting base plate, or
º on the quick mounting base plate
(special accessory) with clamps.
!Mark and punch
the bolt holes on
the work bench.
Use the quick-
mounting baseplate
as a template.
!Drill 13 mm Ø holes.
!Bolt down the
quick-mounting
baseplate.
!Place the vise with
flanged-on pipe
cutter on the base
plate. Tighten the
hexagon nut (1).
1