Specifications

NUSITE
NUSEIS
Geophysical Technology Inc NuSite Page | 63
• After connecting to your device, you will need to press the three bars in the upper left
corner of the screen, or the 3 dots in the upper right, depending on the version of
Geode Connect or Android.
• This will bring up a drop-down menu where you can access device preferences and
setting. On this screen you will need to select preferences.
• This will take you to the screen where you can select Enable Mock Location Provider.
Note you will not be allowed to save this feature unless you change your setting on the
android device in the Developer options Tab. If this is your first time setting up Geode
Connect you should be prompted to change this device setting after you select Enable
Mock Location Provider.