Specifications

NUSITE
NUSEIS
Geophysical Technology Inc NuSite Page | 61
First Time Connection to the Geode
• Turn on the Geode by pressing the power button.
• Open the Android Settings Connection Bluetooth window.
• The Geode will show up in the available devices list as GEODE xxxxx (xxxxx = Geode Serial
Number)
• Tap on that device and the Android device will pair to the Geode. The Geode should now be
listed in the list of Paired Devices. If not paired, Geode Connect will give an error when
trying to connect to the Geode.
• You will need to use your device name for the next step as you will be connecting to
your Geode through Geode Connect. It is preferable to do this next step outside as the
Geode will attempt to search for a GPS signal. If it cannot find the GPS signal the Geode
may restart in its attempt to search, which could disconnect you from the unit. The best
practice would be to wait until the unit has steady GPS contact which would be
indicated by the orange light next to the satellite icon on the front of the Geode.
• You will need to use the drop-down menu to search for your device to connect to the
unit (indicated by red arrow in the figure below).