Specifications

NUSITE
NUSEIS
Geophysical Technology Inc NuSite Page | 39
Deploy/Un-deploy
• If the NRU that is connected to the NuSite device is in an Un-Deployed state, the Deploy button
will be show in the grey bar.
Figure 39
o Tapping on Deploy will send a Deploy command to the NRU, which will flash green if
successful or red if there is an issue and the NRU did not deploy properly.
o After tapping on Deploy, the screen will shift back to the NRU Details page and the BLE
connection to the NRU will be dropped. If required, tap on Connect again in the Details
page to reconnect to the NRU.
o If undeploying with the NuSite device, connect to the NRU. Wait for the blue LEDs to
light and the Connected message to read on the NRU Management Page screen. Tap on
Undeploy and the NRU yellow LEDs will flash 5 times indicating that the NRU has
undeployed successfully
Assign Deployment
• Can be done from either the NRU Details page or the NRU Management Page when connected.
• Assign Deployment – tapping this will open up an assign deployment window.
Figure 40