Specifications

NUSITE
NUSEIS
Geophysical Technology Inc NuSite Page | 36
NRU Management Page
• In the NRU Details Page, if the NRU is in BLE range of the NuSite device, tapping on Connect will
open the NRU Management page. In this page, Deployment or Un-deployment can be done. Or
the unit can be put into Shutdown mode.
➢ Please note that in the current NuSite software, as reflected in the manual screenshots,
Shutdown is referred to as “Shelf”. This will be changed to “Shutdown” within NuSite in future
releases.
Figure 35
NRU Management Page Overview
➢ In the top banner bar left hand corner, under the NRU Management heading will be the NRU
serial number.
➢ The grey bar will show the connection status. If BLE communications have been established
correctly, the message Status: Ok should be shown. If a connection fails to be made or drops out
Disconnected Status Ok will be seen
➢ If the NRU fails to connect, go back to the NRU Details page, then tap on Connect again to retry
the connection.