Specifications

NUSITE
NUSEIS
Geophysical Technology Inc NuSite Page | 30
Figure 30
o Overview – This section is automatically open when the Details page is first opened.
▪ Unit Status – displays current status of the NRU. It is very important to pay
attention to this field to understand NRU status and state.
• CPU status
o When bumping an NRU that is set to Auto-Deploy, a bump
cannot be done until CPU status is Inactive. When the CPU is
Active a bump will not take effect.
o When a deployed unit is undeployed, the CPU will remain active
for up to 60 seconds before switching to low power mode.
• Deployment status
• Recording status
• System Time status
▪ Unit Errors – lists any internal errors detected. If an error is detected, it will
show in this field and the line will turn red. The Overview bar will also turn red
and show the number of errors in the Overview field.