Users Manual
NUSITE
NUSEIS
Geophysical Technology Inc NuSite Page | 64
• If the Geode Connect program has been installed for the first time, the Enable Mock
Location Provider may show as ticked for enabled but is not actually enabled yet.
o Changing the Position Format setting from it’s current setting to either of the
other settings will not affect the coordinates passed through to NuSite, but will
activate the Save icon. These formats only affect the position as displayed on the
Geode Connect application.
o When settings are changed in this screen, be sure to save the changes by tapping
on the Save icon at the bottom right off the screen as seen circled in the
screenshot below. If a setting has been changed the icon will be orange, if not it
will be greyed out. By changing the Position Format setting and saving the