Users Manual
NUSITE
NUSEIS
Geophysical Technology Inc NuSite Page | 60
Setting up Mock Location
After installing the Geode Connect app, open the Android Settings and scroll to the bottom of the
setting menu.
• If the Developers options is not visible, it will need to be enabled.
• Tap on About tablet. In the right hand window the Build Number should be
visible.
• Tap on the Build Number 7 times. During tapping, you should see a message
giving a tap countdown to enabling Developer options. Once the options are
enabled you should see a message stating Developer options enabled.
• Scroll down to the bottom of Settings and Developer options will now be
displayed at the bottom of the page.
As seen here no Mock Location app has been set. You will need to set this to Geode Connect.
Click on Mock Location App and tap on the Geode Connect choice, this will allow you to use the
Mock Location function, and you will see an improvement in GPS performance though NuSite.