Users Manual
NUSITE
NUSEIS
Geophysical Technology Inc NuSite Page | 38
o General – this is the same as the Overview field in the NRU Details page.
o Battery and Charger – this is an extended version of the Environment field from the NRU
Details page. This page is for engineering information and will be phased out in future
releases.
Figure 38
▪ Engineering -Only Field: Raw Data (20 Bytes) – currently present to be used for
Engineering purposes, not useful to the user.
▪ Charger Status – status of the charger circuit expressed in hexadecimal format.
▪ Charger Fault Status – should show 0x0 in hexadecimal format if no faults. If a fault
is occurring, that status would be shown in hexadecimal format and the line would
turn red.
▪ Charger Enabled – charger enabled status would be shown as either True or False.
▪ State of Charge – expressed in a percentage, with 100% indicating full charge of
battery.
▪ Remaining Capacity – value in milliamp hours, shows battery remaining capacity. If
the capacity is below a threshold set in the parameters, this line will be yellow as a
warning.
▪ Voltage – battery voltage shown in millivolts.
▪ Average Current – expressed in milliamps, average charge current for battery
charging.
▪ Instantaneous Current – expressed in milliamps, battery charging current at the
time of the scan from the NRU.
▪ Internal Temperature – internal temperature of the NRU listed in degrees Celsius.
▪ Cycle Count – not implemented.