Users Manual

NUSITE
NUSEIS
Geophysical Technology Inc NuSite Page | 27
Figure 26
o All will display all NRU broadcast scans that were received within the last 30 minutes.
o Broadcasting will display all NRUs that are currently broadcasting within range of the
NuSite device.
o Deployed will display all broadcasting NRUs that have a deployed status.
o Un-Deployed will display all broadcasting NRUs that have an un-deployed status.
o Search by Serial Number will open a dialog popup window that will allow searching for
a NRU serial number amongst the broadcasting NRUs within range of the NuSite device.
Very useful for finding a NRU when there are many NRUs transmitting in the vicinity of
the NuSite device.
The entire serial number does not have to be typed in, just the last 4 digits.
Tapping on OK will display all of the NRUs that currently transmitting status,
that contain those 4 digits.
For example, typing in 0347 will cause all NRUs with 0347 in the serial number,
in that order, to display. 210000347, 210003471, or 210034711 will all be
displayed if they are in receiving range of the NuSite device.
Figure 27
o Status Error will display all broadcasting NRUs with a detected error in status
o Status Warning will display all broadcasting NRUs with a detected warning in status
Auto Assign ticking this box on will enable the Auto Assign function. This allows NuSite to
automatically assign a deployed NRU to a receiver point with no user interaction. If the box is
unticked, the user must enter the receiver line and station manually, see the Assign Deployment
section. Sound should be enabled when using Auto Assign, as there is audio feedback when the
NRU is assigned to a station.