User's Manual

Manual MN71-082 Rev - 8
Cable Connections
Considering its complexity, it may be surprising that Terravision II has only a handful of connections.
1) The survey wheel has a cable coming out of the frame that gets hooked up to either antenna array.
2) A foot-long cable connects the two antenna arrays together.
3) Two identical cables go from the Antenna Array to the Controller Box.
Make sure to get the male and female ends right.
It doesn’t matter which connection you use on the Controller Box; they are identical.
4) An Ethernet cable connects the Controller Box to the Laptop.
5) Battery power goes both to the Controller Box and to the AC/DC converter hidden under the
Laptop mounting frame.
That’s it.
Hooks and clips are located in logical places. Check your ATV for the best way to secure the cables. The
connections that go to the laptop can usually be hidden safely under the seat.
A key on the side of the Controller Box is used to switch power on. It powers everything but the laptop.