User Manual
Table Of Contents
- Limited Warranty, Limitations Of Liability And Restrictions
- Garantie limitée, limites de responsabilité et restrictions
- FCC Notice (for U.S. Customers):
- (a) UWB imaging systems require coordination through the FCC before the equipment may be used. The operator shall comply with any constraints on equipment usage resulting from this coordination.
- Or
- Frequency Coordination Branch, OET
- ATTN: UWB Coordination
- Canadian Requirements for RSS-220
- Canadian Requirements of RSS-220 for Ground Antennas
- Canadian Requirements of RSS-220 for Hand-held Antennas
- Canadian Requirements of RSS-220 for Search and Rescue Antennas
- Table of Contents
- Section 1: Introduction 1
- StructureScan™ Mini XT 2
- Section 2: Getting Started 3
- Section 3: Using ScanEZ Mode 5
- Section 4: Using the Scan3D App 10
- Section 5: Using the ScanMax App 14
- Section 6: Calibrating for Depth in the ScanMax App 20
- Section 7: Using the DualScan App 23
- Section 8: File Management 26
- Setting up Your Laptop/PC and Data Transfer 27
- Launching and Navigating the Software 28
- Viewing and Processing the Data 30
- Processing the Data 32
- Ribbon Options 34
- Home Ribbon Options 34
- 3D Volume Options Ribbon 40
- Chapter 1: Using the StructureScan Mini XT
- Section 1: Introduction
- StructureScan™ Mini XT
- Section 2: Getting Started
- Section 3: Using ScanEZ Mode
- Section 4: Using the Scan3D App
- Section 5: Using the ScanMax App
- Section 6: Calibrating for Depth in the ScanMax App
- Section 7: Using the DualScan App
- Section 8: File Management
- Chapter 2: Using RADAN for StructureScan Mini
- Setting up Your Laptop/PC and Data Transfer
- Launching and Navigating the Software
- Viewing and Processing the Data
- Processing the Data
- Ribbon Options
- Home Ribbon Options
- 3D Volume Options Ribbon
- Appendix A: The Dielectric Constant
- Appendix B: Data Interpretation and Examples of Common Features
- Appendix C: Technical Specifications
- Appendix D: Accessories
- Appendix E: Labeling
Geophysical Survey Systems, Inc. StructureScan™ Mini XT
Manual
MN 70-813 Rev C 31
Current Display:
• Reader: Opens the RADAN Reader display, which allows you to view already processed 2D
data as profiles and 3D data as depth slices. The color table, color transform, and display gain can
also be modified. If targets or picks were added in one of the other displays they can be displayed
as well. Displayed data can be saved as .jpg images. This display is available with any purchase
of RADAN 7 and will become the only way of viewing data once the demo version of the
software expires without activation.
• RADAN for StructureScan Mini: This is display that is designed specifically for data collected
with the StructureScan Mini and Mini XT and includes the ability to instantly process data, do
some additional processing, add interpretations, and export to a jpg or excel to quickly generate a
report.
If any other RADAN modules have been purchased, they will appear here as additional display options.
Opening a File
5 Click the Open icon located on the left side of the Ribbon. This will display a screen defaulted to the
folder you set in the Global Parameters > Source Directory or click on the GSSI Button.
• Select a file to view/process and click Open.
• Or double-click on the Output Folder or Proc Folder to open a previously processed file.
Note: The default file type is to open a 3D file (.bzx) collected using the StructureScan Mini.
If you wish to open a 2D file, you must change the type of file you wish to open (.dzt).