User's Manual
Table Of Contents
- Limited Warranty, Limitations of Liability and Restrictions
- Regulatory Information
- Laser Cautions and Warnings
- Section 1: Getting Started
- Section 2: Configuring the Structure Scan MiniXT in ScanEZ Mode
- Splash Screen Menu Options
- Collecting Data in ScanEZ Mode
- Playing Back Data in ScanEZ Mode
- Section 3: Configuring the Structure Scan MiniXT in Scan3D Mode.
- Splash Screen Menu Options
- Collecting Data in Scan3D Mode
- Playing Back Data in Scan3D Mode
- Section 4: Configuring the Structure Scan MiniXT in System Settings.
- Date/Time: Configuring Date and Time
- Configuration: Configuring Orientation, Language, Units, Laser, and Sound
- Appendix A: Inventory of Your System
- Appendix B: Battery/Charger Information
- Appendix C: Sample Data
- Appendix D: Laser Information
- Laser Information: General
- Laser Information: Specific for the StructureScan Mini
Quick Start Guide StructureScan
™
MiniXT
Geophysical Survey Systems, Inc.
7
Appendix B: Battery/Charger Information
Your system comes with a two-slotted battery charger and adapter. It also comes with
three international interchangeable plugs.
• To charge your batteries, simply attach the adapter to the charger and plug in the
adapter. Insert one or both batteries. The batteries will charge one at a time. The bars
located at the top of the batteries will indicate how much charge is left in the battery.
• At times, you may wish to re-calibrate a battery. Simply insert a battery into the slot
on the left and press the RECAL button
• LED Lights: As the batteries are charging, the LED lights for each slot will do different
things.
• No Lights – No Batteries
• Green Flash – Fast Charging
• Green Solid – Fully Charged
• Yellow Flash – Recalibrating
• Yellow/Green – Recalibrated
• Yellow Solid – Standby
• Red Flash – Error
• If the charger remains plugged in and there are NO batteries in the charger, the charger will eventually begin to
“beep.” Since this can be annoying, it is recommend that you unplug the charger when not in use.