User's Manual
Table Of Contents
- Limited Warranty, Limitations of Liability and Restrictions
- Regulatory Information
- Laser Cautions and Warnings
- Section 1: Getting Started
- Section 2: Configuring the Structure Scan MiniXT in ScanEZ Mode
- Splash Screen Menu Options
- Collecting Data in ScanEZ Mode
- Playing Back Data in ScanEZ Mode
- Section 3: Configuring the Structure Scan MiniXT in Scan3D Mode.
- Splash Screen Menu Options
- Collecting Data in Scan3D Mode
- Playing Back Data in Scan3D Mode
- Section 4: Configuring the Structure Scan MiniXT in System Settings.
- Date/Time: Configuring Date and Time
- Configuration: Configuring Orientation, Language, Units, Laser, and Sound
- Appendix A: Inventory of Your System
- Appendix B: Battery/Charger Information
- Appendix C: Sample Data
- Appendix D: Laser Information
- Laser Information: General
- Laser Information: Specific for the StructureScan Mini
Quick Start Guide StructureScan
™
MiniXT
Geophysical Survey Systems, Inc.
14
• This product is designed to be opened by Field Service Professionals employed and/or trained by Geophysical Survey
Systems, Inc only. Do not open this product. Tampering with this product voids all warranties.
• The laser has no serviceable parts.
• The laser will flash several times during system boot up.
• The laser will blink (whether Laser is configured On or Off) when the battery life is low (10%)
• Remove the battery whenever transporting the product.
• Remove the battery whenever doing any self maintenance to the product, such as cleaning the windows of the
lasers.
• If the lasers are configured On and the lasers are not working during collection of data, do not open the product. The
product must be serviced by an authorized GSSI employee or representative only.
• If the lasers are configured On, they will work only while in the Collect menu option.
• The lasers will remain on (if Laser is configured On) even if the unit goes into sleep mode.