User's Manual
Table Of Contents
- Limited Warranty, Limitations of Liability and Restrictions
- Regulatory Information
- Laser Cautions and Warnings
- Section 1: Getting Started
- Section 2: Configuring the Structure Scan MiniXT in ScanEZ Mode
- Splash Screen Menu Options
- Collecting Data in ScanEZ Mode
- Playing Back Data in ScanEZ Mode
- Section 3: Configuring the Structure Scan MiniXT in Scan3D Mode.
- Splash Screen Menu Options
- Collecting Data in Scan3D Mode
- Playing Back Data in Scan3D Mode
- Section 4: Configuring the Structure Scan MiniXT in System Settings.
- Date/Time: Configuring Date and Time
- Configuration: Configuring Orientation, Language, Units, Laser, and Sound
- Appendix A: Inventory of Your System
- Appendix B: Battery/Charger Information
- Appendix C: Sample Data
- Appendix D: Laser Information
- Laser Information: General
- Laser Information: Specific for the StructureScan Mini
Quick Start Guide StructureScan
™
MiniXT
Geophysical Survey Systems, Inc.
13
Appendix D: Laser Information
Laser Information: General
• Do not intentionally point the laser into your eye. Do not look directly into the laser
light source.
• Do not place the laser in a position that may cause anyone to stare into the laser beam
intentionally or unintentionally.
• Always power down the unit when not in use.
• Never view a laser through an optical device such a binoculars or a microscope.
Laser Information: Specific for the StructureScan Mini
• Do not remove or deface any product labels.
• This product contains lasers used as guides. Do not stare into any of the beams.
• You may configure the lasers on or off. From the Main menu:
a) Select Configure
b) Press and highlight Configuration and press
.
c) Press and highlight LASER
d) Press
to toggle the laser On or Off.